-
Hamilton Cams Heavy Duty pushrods are ideal for 12V Cummins that generate between 500-750HP. For road or competition use.Cummins engine 6BT/12V
Dodge Ram 1989-1998.5
Road and competition use -
These ARP Head Studs for Cummins will withstand a pull of 220,000 psi and provide the strength needed to keep the engine head securely in place despite the high pressure caused by combustion. Cummins Engine ISB 5.9L/6.7L Dodge RAM diesel 1998.5 et + Tensile strength 220 000 psi -
These studs withstand a pull of 260,000 psi and provide the strength needed to keep the motor head securely in place despite the high pressure caused by combustion. Cummins Engine ISB 5.9L/6.7L Dodge RAM diesel 1998.5 et + Tensile strength 260 000 psi -
These studs provide the necessary strength to keep the engine head securely in place despite the high pressure caused by combustion.
- Model ARP 425: Tensile strength of 220,000 psi
- Model ARP CA625+: Tensile strength of 260,000 psi
-
Cummins 4BT 3.9L The Big Stick has grown in popularity by providing better torque to mid to high performance trucks. Camshaft "BIG STICK" stage 3: 4000 RPM -
This bolt-on retainer holds the camshaft in place at high RPMs. Cummins 3.9L/5.9L/6.7L Dodge Ram 1989-2018 -
These tappets are designed with a maximum diameter and convex crown for better performance.
Cummins 6BT/12-24V Cummins ISB/5.9L-6.7L Dodge 1989-2017 -
These tappets are designed with a maximum diameter and convex crown for better performance.
Tappets Colt Cams
Cummins 4BT
-
These studs withstand a pull of 200,000 psi and provide the strength needed to keep the motor head securely in place despite the high pressure caused by combustion. Cummins 4BT 3.9L Engine Tensile strength 200 000 psi -
These Cummins 6BT 12 valves ARP Head Studswill withstand a pull of 220,000 psi and provide the strength needed to keep the engine head securely in place despite the high pressure caused by combustion. Cummins Engine 6BT/12V. Dodge RAM diesel 1989-1998.5 Tensile strength 220 000 psi
-
Dodge Ram 1989-1998.5
Cummins 5.9L/12 valves
These rocker arm mounts for Cummins are ideal for avoiding delays when installing performance head studs.
-
These GATOR FASTENERS head studs for Cummins do not stretch like stock studs. By keeping the engine head securely in place, they prevent gasket popping. As a bonus, each head stud kit contains a free tube of AMSOIL Assembly Lubricant. Dodge Ram 1989-1998.5 Cummins 5.9L/12V Tensile strength: Over 220,000 psi Maximum load: Over 120 KN -
These GATOR FASTENERS head studs for Cummins do not stretch like stock studs. By keeping the engine head securely in place, they prevent gasket popping. As a bonus, each head stud kit contains a free tube of AMSOIL Assembly Lubricant. Cummins Engine ISB 5.9L/6.7L Dodge RAM 1998.5 et + Tensile strength: Over 220,000 psi Maximum load: Over 120 KN -
Hamilton Cams Heavy Duty pushrods are ideal for 12V Cummins that generate between 500-750HP. For road or competition use.
Cummins engine 6BT/12V
Dodge Ram 1989-1998.5
Road and competition use -
The Hamilton Cams Competition valve springs allow higher boost pressures and rpm without valve float or unacceptable levels of reversion. Correct valve spring pressure is very important to power production in your Cummins. Cummins Engine ISB 5.9L/6.7L Dodge RAM 1998.5-2018 Features:- 24 Valve Competition Springs
- Good to 6,500 RPM
- For Competition Use
-
Hamilton Cams Extreme Duty pushrods are a must-have on 4BT Cummins that make over 500HP.
High horsepower engine cylinder pressure requires 3/8” .095” intake thrust and 7/16” .120” exhaust lifters.
Cummins Engine 4BT/3.9LFor use above 500HP
-
A high performance engine requires a high performance gasket!
Dodge Ram 1989-2002 Cummins 6BT/12-24V This gasket and fire rings kit eliminates high boost gasket problems by providing a stronger seal.- Thickness +.020
- 4.560" Wire O.D.
- Ideal for high performance/competition builds
-
A high performance engine requires a high performance gasket!
Dodge Ram 1989-2002 Cummins 6BT/12-24V This gasket and fire rings kit eliminates high boost gasket problems by providing a stronger seal.- Standard thickness
- 4.560" Wire O.D.
- Ideal for high performance/competition builds
-
A high performance engine requires a high performance gasket!
Dodge Ram 2007+ Cummins ISB/6.7L This gasket and fire rings kit eliminates high boost gasket problems by providing a stronger seal.- Standard thickness
- 4.560" Wire O.D.
- Ideal for high performance/competition builds
-
Hamilton Cams valve springs are ideal if your truck boosts over 50 lbs, if your engine runs over 3800 RPM or in combination with a performance camshaft.
-
Hamilton Cams Extreme Duty pushrod are a must-have on 12-valve Cummins that make over 750HP.
High horsepower engine cylinder pressure requires 3/8” .095” intake thrust and 7/16” .120” exhaust lifters.
Cummins Engine 6BT/12V Dodge Ram 1989-1998.5For use above 750HP
-
A high performance engine requires a high performance gasket!
Dodge Ram 2003-2007 Cummins ISB/5.9L This gasket and fire rings kit eliminates high boost gasket problems by providing a stronger seal.- Standard thickness
- 4.560" Wire O.D.
- Ideal for high performance/competition builds
-
A high performance engine requires a high performance gasket!
Dodge Ram 2007+ Cummins ISB/6.7L This gasket and fire rings kit eliminates high boost gasket problems by providing a stronger seal.- Thickness +.020
- 4.560" Wire O.D.
- Ideal for high performance/competition builds
-
Hamilton Cams valve springs are ideal if your truck boosts over 50 lbs, if your engine runs over 3800 RPM or in combination with a performance camshaft. Cummins Engine ISB 5.9L/6.7L Dodge RAM 1998.5-2018
